Acer Emachines e725 is one of the most feature rich laptop at cheapest price avaialble in India and powered by Intel Dual Core processor.
Acer Emachines e725 Laptop Technical Specification:
Many many big hands to all for making my site successfull release.. nd another thanks to release my site in exact date. Thanking you again.I had told you that I create lot of sites many sites are placed now in bad position,not updating dialy and geting not satisfied vsitors for only lack of promotion.So making this site I think of making a huge promotion and I doing it..
I will post dialy I promised.. and please try to make successfull my online career by dialy visiting,followin on twitter,comments,mails,and clicking advertisement
A lot of thanking you,
muah!
| General | 2G Network | GSM 850 / 900 / 1800 / 1900 |
|---|---|---|
| 3G Network | UMTS 900 / 2100 | |
| UMTS 850 / 1900 - American version | ||
| Announced | 2009, May | |
| Status | Available. Released 2009, October |
| Size | Dimensions | 109.6 x 46.9 x 14.4 mm, 65 cc |
|---|---|---|
| Weight | 87.7 g |
| Display | Type | TFT, 256K colors |
|---|---|---|
| Size | 240 x 320 pixels, 2.0 inches | |
| - 5-way navigation key |
| Sound | Alert types | Vibration; Downloadable polyphonic, MP3 ringtones |
|---|---|---|
| Speakerphone | Yes | |
| - 3.5 mm audio jack |
| Memory | Phonebook | 1000 entries, Photocall |
|---|---|---|
| Call records | 20 dialed, 20 received, 20 missed calls | |
| Internal | 30 MB | |
| Card slot | microSD, up to 2GB, 1GB included, buy memory |
| Data | GPRS | Class 32 |
|---|---|---|
| EDGE | Class 32 | |
| 3G | Yes, 384 kbps | |
| WLAN | No | |
| Bluetooth | Yes, v2.0 with A2DP | |
| Infrared port | No | |
| USB | Yes, v2.0, microUSB |
| Camera | Primary | 2 MP, 1600x1200 pixels |
|---|---|---|
| Video | Yes, 176x144@10fps | |
| Secondary | No |
| Features | Messaging | SMS, EMS, MMS, Email |
|---|---|---|
| Browser | WAP 2.0/xHTML | |
| Radio | Stereo FM radio with RDS | |
| Games | 4 + Downloadable | |
| Colors | Black or Dark Magenta | |
| GPS | No | |
| Java | Yes, MIDP 2.1 | |
| - MP4/H.263 player - MP3/WAV/WMV/eAAC+ player - Organizer - Flash Lite 3.0 - Voice memo/dial - T9 |
| Battery | Standard battery, Li-Ion 1020 (BL-5C) | |
|---|---|---|
| Stand-by | Up to 396 h (2G) / Up to 408 h (3G) | |
| Talk time | Up to 7 h 20 min (2G) / Up to 3 h 30 min (3G) | |
| Music play | Up to 12 h |
PRICE:- 4500
NOP,Net On Phone is a almost famous for using internet in mobile cheaply.But now you need not to spend a paise for this service.Yes!It's working 100% and tested in few state...Usually I tested it KOLKATA and W.B.
Airtel launched a special scheme of this 7 days free trial.
The fault is that after 7 days if you wanna to activate again it will be activated and enjoy the free Internet. Process of activation is by dialing *555*3# after that you will be got a message as "Now you can enjoy internet" .Now you need to set up settings,you may can get it by calling CC or manual set up.. Here is the manual settings..
APN:-airtelwap.com
Proxy:-100.1.200.99
Port:-8080
And else other spaces set defaults
Twitter is the most famous sociel site now a days..Orkut and facebook lest them because almost many celebrities have an accounts of twitter and they twiting in every minutes.Therefoere all celebrities can get response and stay closed to the mango people by this social website..
The counter saying the year of 2006-07 was for ORKUT and 08-09 was Facebook and now its time for Twitter..
Although the site is not too rich devoloped but the idea is awesome.Therefore it got popularity.More advantage is that this is most userfriendly and it's not too difficult like facebook and Orkut...
We are not advertising the website of twitter.I'm writting about this site because I have a profile in twitter..Please follow me therefore you may get touch me and be friend of me . http://twitter.com/sayantanhalder
Thanking you
First of all Buy a normal 2g bsnl's sim card and keep balance 50+ rs.
now activate gprs by sending sms GPRS E to 53733 It will be
actrivated in 24 hours, after activation get gprs settings by calling c.care
APN:-gprseast.cellone.in or bsnlnet
Now do e-recharge with 230 rs (or whatever unlimited plan exists in your area)
in it, After activation You have to chnage only one thing in yor 3G enabled cell.
Go to settings>tools>settings>phone&g
t;network>network mode> now select UMTS
THEN do manual searching for network u will fing bsnl 3g network there wid small 3g logo along wid its name,select it as default
Now see your data singnals logo..... vola it is converted into 3G
You will get near about 500kbps to 1200 kbps speed
Remember use gprseast.cellone.in or bsnlnet as ur access point
but its 100% working
Enjoy 3G at appr. no cost.....
Here IS the SPEED Proove :-
If your have a non use hard disk you may can use it for as a external! Let us made it..
Made by I/OMagic, a reputable company that specializes in a variety of peripheral computer products, this USB 2.0 hard drive enclosure was on sale for $19.97 — a deal that I just couldn’t pass up. As you can see in Figure B, this is a very basic hard drive enclosure with a compact, yet very sturdy, aluminum case which acts as a heat sink — there’s no fan and no fancy lights either. The kit comes with the enclosure, a vertical stand, a power supply, a USB cable, small package of screws, and a quick installation guide.
One of the biggest problems people encounter when building an external hard drive using an IDE drive has to do with the jumper setting configuration on the hard drive itself. The correct setting may depend on any one of several factors: the IDE to USB converter circuitry in the enclosure, your computer’s BIOS, or the hard disk specifications. Of course, the first place to look for information on the correct settings is in the manual or guide that came with the hard drive enclosure. If the manual doesn’t recommend a specific setting or your drive doesn’t seem to work with the recommended setting, you’ll just have to experiment.
Now, I’ve built several external hard drives using different hard disk enclosure products and have discovered that many products specifically recommend using the Master jumper setting configuration. However, the user guide for the I/OMagic enclosure did not provide any indication of how the drive should be configured.
As such, I was left to my own to find the correct setting. If you find yourself in the same position, you need to understand how the jumper settings on IDE hard drives work.
To begin with you need to understand that in a standard internal configuration of IDE hard drives the jumper settings are used to determine the order in which hard drives and other devices, such as CD/DVD drives, attached to a single interface cable are detected by a computer system. Setting the jumpers correctly on a hard drive requires the placement of a jumper shunt over two pins on the hard drive jumper block. Figure C shows a jumper block on a typical IDE hard drive and a jumper shunt.
There are four possible jumper settings on most IDE drives:
The Master and Slave settings work together when there are two drives attached to the same cable. One drive is jumpered as the Master and placed on the end of the cable. The other drive is jumpered as the Slave and placed in the middle of the cable. The Cable Select settings can also be used when there are two drives attached to the same cable. In this type of configuration, each drive is jumpered as Cable Select and the drives actual position on the cable determines whether it is the master or the slave.
If there is only one drive on the cable, it can be “jumpered” in any one of several configurations depending on the hard drive. The most logical is the Single setting, which in most cases means that there are no jumper shunts on the jumper block. The other logical setting is Cable Select. However, in some situations a single internal IDE drive can be configured using the Master setting.
Now that you understand the jumper settings function, you have a good idea of what you need to try when the manual doesn’t recommend a specific setting or your drive doesn’t seem to work with the recommended setting. Since the majority of the enclosures that I’ve worked with recommend the Master jumper setting, that’s the one that I experimented with first. However, when I did, the drive simply was not recognized by the operating system.
I then tried the Single setting by removing no jumper shunt from the jumper block, the drive was then recognized by the operating system. Just to be complete, I also tried the Cable Select jumper setting. Again the drive was recognized by the operating system.
Many hard drives have a diagram on the label that shows the various settings; however, others, such as my old Western Digital drive, have labels printed on the circuit board that indicate the various jumper settings, as shown in Figure D.
Using a tweezers, you can remove or reposition the jumper to the pins that correspond to the correct position, as shown in Figure E.
Opening my example enclosure simply involved removing a couple of screws and then sliding the drive tray out of the enclosure. With the drive tray out of the enclosure, you can then connect the hard drive to the IDE and power connectors, as shown in Figure F. You’ll then fasten the drive to the tray using the included screws.
With the drive securely anchored, you can slide the tray back into the enclosure, as shown in Figure G. As you do so, you may need to gently tuck the IDE and power cables under the edge of the case. Then, all you need to do is refasten the tray to the enclosure using the screws that you removed earlier.
Once you’ve assembled the hard drive enclosure, you can connect it to your computer. To begin, make sure that the enclosure’s switch is set to the off position. Next, connect the USB cable to the back of your computer and to the back of the enclosure. Then connect the power cable to the back of enclosure and plug it into an outlet. With all the connections made, as shown in Figure H, all you have to do is flip on the switch.
As soon as the enclosure powers up the hard drive, Windows will recognize the new USB connection and will begin installing the device drivers. When the drivers are installed, you’ll see a pop up balloon that lets you know the operation is complete. Since you’re using an old hard disk that has been initialized and formatted, it will immediately show up in My Computer, as shown in Figure I, and you can access it immediately. However, you’ll probably want to reformat the drive in order to give yourself a fresh start.
Building an external storage system using an old hard disk and an external enclosure kit is a great way to put your old equipment to good use. Following the steps in this article will allow you to quickly and easily build an external hard disk that you can use for extra data storage or as a new backup destination.
Thanking you,
cutesayantan@gmail.com
I checked my I.Q. on net.. The result is 128 points and Einstine was the IQ of 180 too far to me.He is just no a exceptional, but a complete mysterious .Some of his theories now still undiscovered but it's prooved already dat he was perfect .I think of to share a theory of Einstine's SPACETIME ,Some infomation may collected from net .It's not ma completly exclusive I selendered
In classical mechanics, the use of Euclidean space instead of spacetime is appropriate, as time is treated as universal and constant, being independent of the state of motion of an observer. In relativistic contexts, however, time cannot be separated from the three dimensions of space, because the rate at which time passes depends on an object's velocity relative to the speed of light and also on the strength of intense gravitational fields, which can slow the passage of time.
See sume picture which draws by the fiction of artists
Videoes:-~Abraham-Hicks~Time and Space Illusion,What Lies Beyond Our Own Space-Time Continuum ...
I'm waiting for your reply and comments
